Sprayers
Automatic Spray Gun for Glass Beads
* The gun can operate with both pressurized and non-pressurized tanks.
* Smooth/stepless adjustment of the glass bead flow rate using a screw.
* Smooth/stepless adjustment of the air flow rate using a screw.
* Diffuser material – elastomer (for protection against abrasive wear and mechanical damage caused by uneven asphalt).
* All housing components are made of stainless steel.
* The rod has a hard chrome coating.
* The diffuser is adjustable in width from 10 cm to 25 cm.
* Control pressure: 6.5 bar.
* Pneumatic hose connection: 8 mm.
* Glass bead connection nozzle: ¾".
* Lightweight gun with diffuser: 1.3 kg.
Airless Paint Spray Gun with Pneumatic Control
* Maximum paint pressure: 300 bar.
* All housing components are made of stainless steel.
* The rod has a hard chrome coating.
* Nozzles are compatible with Kamber.
* Control pressure: 6.5 bar.
* Pneumatic hose connection: 8 mm.
* Paint supply nozzle: 3/8".
* Control pressure: 6.5 bar.
* Lightweight gun: 1.1 kg.
Pneumatic Dispenser for Glass Beads
* Ensures perfect application of glass beads through pneumatic spraying.
* Smooth/stepless adjustment of the glass bead flow rate.
* Smooth/stepless adjustment of the glass bead consumption.
* Adjustable diffuser width.
* Housing made of stainless steel.
* Device weight without glass beads: 2.5 kg.
* Hopper capacity: 6 liters.
* Control pressure: 6.5 bar.
* Pneumatic hose connection: 8 mm.
* Air consumption: approximately 120 l/min.
* Compatible with all sizes of glass beads, as well as mineral fillers for creating anti-slip coatings.
Pneumatic Thermoplastic Spray Gun
* Ensures optimal performance at thermoplastic spray temperatures up to 260 degrees.
* Line width: 10 to 20 cm.
* Nozzle diameter: 13 mm.
* Spray pressure: 6 to 8 bar.
* Control pressure: 6.5 bar.
* Spray gun weight: 6 kg.
* Thermal oil supply: 3/8".
* Spray air supply: 3/8".
* Pneumatic hose connection for control: 8 mm.
* Thermoplastic supply nozzle: 1".
* Compatible with pressure tanks or pumps.